Basic Info
  • Model NO.: HTMA-SW600
  • Application: Electric
  • Performance: High Pressure
  • Standard: Standard, Nonstandard
  • Color of Gaskets: According The ASME Standard
  • Quality: High Level of Spiral Wound Gasket
  • Package: Wooden Case for Spiral Wound Gaskets
  • Origin:   China
  • Material: 316L,
  • Type: Shaft Seal
  • Shape: O-Ring
  • Product Name: Spiral Wound Gasket
  • Certificate: Dnv ISO9001,SGS
  • Trademark:htma
  • Specification: according your request
Product Description
Star product:Spiral wound gasket from Sunwell seals/CG/CGI/IR/R Type
1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per
4.Material combinations for all operating conditions.

Graphite seals spiral wound gaskets have 4 types:
1.SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. – Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
2.SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. – Suitable for male and female pipe flanges.
3.SW600-CG Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts – Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.

4.SW600-CGI Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. – Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service – Class 900 and above or where corrosive or toxic media are present.

Spiral wound gaskets

More information of spiral wound gaskets,please contact with graphite seals,thanks.

Hi-tech Material Co.,Ltd

Address: No.1, Xingmao Street, Tongzhou District, Beijing 100176, China.

Post code: 100176

Fax: +86 10 80828912



Marketing center: +86-17701349487

Human Resources: +86-15313026852

Carbon, Graphite, Carbon composite!