Basic Info
  • Model NO.: Htg
  • Motor Type: AC Motor
  • Rotationl Speed: 20-22r/min
  • Materials: Stone
  • Outlet Size L*W*H (M): 18*4.6*8.6
  • Ring Diameter(Mm): 1000
  • Roller Number(PCS): 30-44
  • Fineness: 30-3000 Mesh
  • Trademark: htma
  • Specification: CE, SGS
  • HS Code: 84742090
  • Type: Black Milling Machine
  • Motor Power: 30KW
  • Application: Mine
  • Condition: New
  • Finished Size (Um/Mesh): 150-2500
  • Ring Number (PCS): 4
  • Main Shaft Speed (R. P. Min): Main Shaft Speed (R. P. Min)
  • Output: 0.4t/H to 12t/H
  • Package: Standard, Container Needed
  • Origin: Shanghai, China
Product Description
Carbon Black Milling Machine/ Waste Pyrolytic Decomposition Carbon Black Grinding Mill
— five models: HGM80, HGM90, HGM100, HGM100A, and HGM125
–finished production fineness: 300meshes~3000meshes, 5-47 micron
–the capacity (ton/hour) ranges from 0.4T/H to 12T/H

Application of Carbon Black Milling Machine/ Waste Pyrolytic Decomposition Carbon Black Grinding Mil
HGM Series Carbon Black Milling Machine,powder grinding machineis the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh’s hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite,rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

Work Principle of Carbon Black Milling Machine/ Waste Pyrolytic Decomposition Carbon Black Grinding Mill
HGM series Carbon Black Milling Machine,powder grinding machinemainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

Features of Carbon Black Milling Machine/ Waste Black Grinding Mill
High Efficiency
Under the same finished final size and the same motor power, the capacity of Carbon Black Milling Machine,powder grinding machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size.

Main specification of Carbon Black Milling Machine/ Waste Pyrolytic Decomposition Carbon Black Grinding Mill

Model HGM80 HGM90 HGM100 HGM125 HGM1680L
Ring Diameter(mm) 800 900 1000 1250 1680
Ring Number (PCS) 3 34 4 4 4
Roller Number(PCS) 18-21 24-29 28-36 30-44 30-40
Main Shaft Speed (r. p. min) 230-240 200-220 180-200 135-155 120-130
Input Size (mm) ≤10 ≤10 ≤15 ≤15 ≤20
Finished Size (um/mesh) May-74 May-74 May-74 100-6 100-9
(200-2500) (200-2500) (200-2500) (150-2000) (150-1500)
Capacity (t/h) 0.4-4.5 0.6-6.5 19 216 3.8-30
Outlet Size L*W*H (m) 13.9*4*6.2 14.7*4.8*7.2 18*4.6*8.6 14*9*10.25 26.3*7.5*11.9
Unit: KW HGM80 HGM90 HGM100 HGM125 HGM1680L
Main Unit 55-75 2*45 132 185-200 315
Classifier 18.5 18.5 30 37-4*15 5*18.5
Blower 45 55 75 2*45-2*55 2*75-2*90
Crusher 18.5 18.5 18.5 45 75
Bucket Elevator 3 3 4 4 7.5
BeltConveyor Feeder 2.2 2.2 2.2 3 3
Spiral Conveyor 3 3 34 2*3 2*5.5
Discharging Valve 2*0.75 1*0.75  1*1.1 2*1.1 2*1.1 2*0.75-2*1.5
Air compressor 11 15 22 2*15-37 55

Note: This specification is just referencing, any changes are subject to the products.

Inquiry Service of mineral powder grinding mill:
Please fill in your need products and your message if you like to be contacted. Kindly check the following:

1. What is the raw material do you want to process?
2. What is the capacity per hour do you need?
3. What is the raw material input size?
4. What is the output size of your product?

We hope you can tell us these details, we will give you the best quotation, technical data and solution drawing ASAP. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!